 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Freescale Semiconductor Technical Data Document Number: MPC8640DECS01AD Rev. 0, 12/2008 MPC8640 and MPC8640D Integrated Host Processor Hardware Specifications Addendum for the MC8640xTxxyyyyaC Series This document describes part-number-specific changes to recommended operating conditions and revised electrical specifications, as applicable, from those described in the general MPC8640 and MPC8640D Integrated Host Processor Hardware Specifications (Document No. MPC8640DEC). Specifications provided in this document supersede those in the MPC8640 and MPC8640D Integrated Host Processor Hardware Specifications, Rev. 1 or later, for the part numbers listed in Table A only. Specifications not addressed herein are unchanged. Because this document is frequently updated, refer to the website listed on the back page of this document or contact your Freescale sales office for the latest version. Note that headings and table numbers in this document are not consecutively numbered. They are intended to correspond to the heading or table affected in the general hardware specification. Freescale Part Numbers Affected: MC8640DTHX1250HC MC8640DTHX1000HC MC8640DTHX1067NC MC8640DTVU1250HC MC8640DTVU1000HC MC8640DTVU1067NC MC8640THX1250HC MC8640THX1000HC MC8640THX1067NC MC8640TVU1250HC MC8640TVU1000HC MC8640TVU1067NC (c) Freescale Semiconductor, Inc., 2008. All rights reserved. General Parameters Part numbers addressed in this document are listed in Table A. Table A. Part Numbers Addressed by This Data Sheet Operating Conditions Freescale Part Number CPU Frequency (MHz) 1250 1000 1067 1250 1000 1067 1250 1000 1067 1250 1000 1067 Tj (C) -40 to 105 Significant Differences from Hardware Specification VDD_Coren 1.05 V 50 mV 1.05 V 50 mV 0.95 V 50 mV 1.05 V 50 mV 1.05 V 50 mV 0.95 V 50 mV 1.05 V 50 mV 1.05 V 50 mV 0.95 V 50 mV 1.05 V 50 mV 1.05 V 50 mV 0.95 V 50 mV MC8640DTHX1250HC MC8640DTHX1000HC MC8640DTHX1067NC MC8640DTVU1250HC MC8640DTVU1000HC MC8640DTVU1067NC MC8640THX1250HC MC8640THX1000HC MC8640THX1067NC MC8640TVU1250HC MC8640TVU1000HC MC8640TVU1067NC Modified JTAG AC timing; extended junction temperature range. 2 General Parameters This section summarizes changes to the general parametersof the MPC8640 described in the MPC8640 and MPC8640D Integrated Host Processor Hardware Specifications. * Modified JTAG AC timing -- tJTDVKH (min) = 15 ns * Extended junction temperature range -- TJ = -40 to 105 C 2.1 2.1.2 Overall DC Electrical Characteristics Recommended Operating Conditions Table 2. Recommended Operating Conditions Characteristic Symbol TJ Recommended Value -40 to 105 Unit C Notes -- Table 2 provides the recommended operating conditions for the MPC8640 part numbers described herein. Junction temperature range MPC8640 and MPC8640D Integrated Host Processor Hardware Specifications Addendum for the MC8640xTxxyyyyaC Series, Rev. 0 2 Freescale Semiconductor General Parameters 11.2 JTAG AC Electrical Specifications Table 43. JTAG AC Timing Specifications (Independent of SYSCLK) 1 Table 43 provides the JTAG AC electrical specifications for the MPC8640 part numbers described herein. At recommended operating conditions (see Table 3). Parameter Input setup times: Boundary-scan data TMS, TDI Symbol 2 tJTDVKH tJTIVKH Min 15 0 Max -- -- Unit ns Notes 4 Notes: 1. All outputs are measured from the midpoint voltage of the falling/rising edge of tTCLK to the midpoint of the signal in question. The output timings are measured at the pins. All output timings assume a purely resistive 50- load (see Figure 32). Time-of-flight delays must be added for trace lengths, vias, and connectors in the system. 2. The symbols used for timing specifications herein follow the pattern of t(first two letters of functional block)(signal)(state) (reference)(state) for inputs and t(first two letters of functional block)(reference)(state)(signal)(state) for outputs. For example, tJTDVKH symbolizes JTAG device timing (JT) with respect to the time data input signals (D) reaching the valid state (V) relative to the tJTG clock reference (K) going to the high (H) state or setup time. Also, tJTDXKH symbolizes JTAG timing (JT) with respect to the time data input signals (D) went invalid (X) relative to the tJTG clock reference (K) going to the high (H) state. Note that, in general, the clock reference symbol representation is based on three letters representing the clock of a particular functional. For rise and fall times, the latter convention is used with the appropriate letter: R (rise) or F (fall). 4. Non-JTAG signal input timing with respect to tTCLK. MPC8640 and MPC8640D Integrated Host Processor Hardware Specifications Addendum for the MC8640xTxxyyyyaC Series, Rev. 0 Freescale Semiconductor 3 Ordering Information 21 Ordering Information 21.1 Part Numbers Addressed by This Specification Table 73 provides the ordering information for the MPC8640 parts described in this document. Table 73. Part Numbering Nomenclature uu nnnn D w xx yyyy Core Processor Frequency 2 (MHz) a z Product Part Code Identifier Core Count Temp Package 1 DDR speed (MHz) Product Revision Level Blank = Single Core MC5 8640 D= Dual Core T: -40C to 105C Revision C = 2.1 System Version Register Value for Rev C: 4 1000, 1067, N = 533 MHz 0x8090_0021 - MPC8640 1250 VU = RoHS lead-f H = 500 MHz 0x8090_0121 - MPC8640D ree HCTE FC-CBGA HX = High-lead HCTE FC-CBGA Notes: 1. See Section 16, "Package," for more information on available package types. 2. Processor core frequencies supported by parts addressed by this specification only. Not all parts described in this specification support all core frequencies. Additionally, parts addressed by part number specifications may support other maximum core frequencies. 3. The P prefix in a Freescale part number designates a "Pilot Production Prototype" as defined by Freescale SOP 3-13. These parts have only preliminary reliability and characterization data. Before pilot production prototypes may be shipped, written authorization from the customer must be on file in the applicable sales office acknowledging the qualification status and the fact that product changes may still occur while shipping pilot production prototypes. 4. Part Number MC8640xxx1067NC is our low VDD_Coren device. VDD_Coren = 0.95 V and VDD_PLAT = 1.05 V. 5. MC - Qualified production Document Revision History Table B provides a revision history for this hardware specification addendum. Table B. Document Revision History Rev. Number 0 Date 12/2008 Initial release. Substantive Change(s) MPC8640 and MPC8640D Integrated Host Processor Hardware Specifications Addendum for the MC8640xTxxyyyyaC Series, Rev. 0 4 Freescale Semiconductor Ordering Information THIS PAGE INTENTIONALLY LEFT BLANK MPC8640 and MPC8640D Integrated Host Processor Hardware Specifications Addendum for the MC8640xTxxyyyyaC Series, Rev. 0 Freescale Semiconductor 5 Ordering Information THIS PAGE INTENTIONALLY LEFT BLANK MPC8640 and MPC8640D Integrated Host Processor Hardware Specifications Addendum for the MC8640xTxxyyyyaC Series, Rev. 0 6 Freescale Semiconductor Ordering Information MPC8640 and MPC8640D Integrated Host Processor Hardware Specifications Addendum for the MC8640xTxxyyyyaC Series, Rev. 0 Freescale Semiconductor 7 How to Reach Us: Home Page: www.freescale.com Web Support: http://www.freescale.com/support USA/Europe or Locations Not Listed: Freescale Semiconductor, Inc. Technical Information Center, EL516 2100 East Elliot Road Tempe, Arizona 85284 1-800-521-6274 or +1-480-768-2130 www.freescale.com/support Europe, Middle East, and Africa: Freescale Halbleiter Deutschland GmbH Technical Information Center Schatzbogen 7 81829 Muenchen, Germany +44 1296 380 456 (English) +46 8 52200080 (English) +49 89 92103 559 (German) +33 1 69 35 48 48 (French) www.freescale.com/support Japan: Freescale Semiconductor Japan Ltd. Headquarters ARCO Tower 15F 1-8-1, Shimo-Meguro, Meguro-ku Tokyo 153-0064 Japan 0120 191014 or +81 3 5437 9125 support.japan@freescale.com Asia/Pacific: Freescale Semiconductor China Ltd. Exchange Building 23F No. 118 Jianguo Road Chaoyang District Beijing 100022 China +86 10 5879 8000 support.asia@freescale.com For Literature Requests Only: Freescale Semiconductor Literature Distribution Center P.O. Box 5405 Denver, Colorado 80217 1-800 441-2447 or +1-303-675-2140 Fax: +1-303-675-2150 LDCForFreescaleSemiconductor @hibbertgroup.com Information in this document is provided solely to enable system and software implementers to use Freescale Semiconductor products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. Freescale Semiconductor reserves the right to make changes without further notice to any products herein. Freescale Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Freescale Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters which may be provided in Freescale Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Freescale Semiconductor does not convey any license under its patent rights nor the rights of others. Freescale Semiconductor products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Freescale Semiconductor product could create a situation where personal injury or death may occur. Should Buyer purchase or use Freescale Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold Freescale Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Freescale Semiconductor was negligent regarding the design or manufacture of the part. Freescale and the Freescale logo are trademarks or registered trademarks of Freescale Semiconductor, Inc. in the U.S. and other countries. All other product or service names are the property of their respective owners. The Power Architecture and Power.org word marks and the Power and Power.org logos and related marks are trademarks and service marks licensed by Power.org. (c) Freescale Semiconductor, Inc., 2008. All rights reserved. Document Number: MPC8640DECS01AD Rev. 0 12/2008 |
Price & Availability of MC8640DTVU1000HC
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |